|
|
Characterization of graphene electrical properties on MEMS structures
Brodský, Jan ; Pekárek, Jan (referee) ; Gablech, Imrich (advisor)
This work presents basic properties of graphene, methods for its synthesis and methods for its characterization by Raman spectroscopy, two-point probe, four-point probe and van der Pauw measurements. The experimental part of this work describes the process of graphene oxide, reduced graphene oxide and graphene sample preparation and measurement of its current-voltage characteristic by two-point probe method. Subsequently, sample annealing in vacuum furnace is described in this work. The annealing is important for acquiring good electrical contact between the 2D material and electrodes. Sample analysis by Raman spectroscopy is performed. The last chapters of this work describe design and fabrication of MEMS structure. Such structure serves for characterization of graphene and other 2D materials.
|
|
|
PV plant performance evaluation and optimization
Špinar, Marek ; Ptáček, Michal (referee) ; Morávek, Jan (advisor)
The Master´s thesis deals with issues of operational performance of two photovoltaic power plants. In the thesis is stated the history of photovoltaics, description of photovoltaic effect, used materials and production technology of the most used material in PV industry – Silicon. The basic parts and parameters of photovoltaic power plant are described. Thesis also solves, how could be done the first and periodically control due to relevant directives. The ways of diagnostics potentional failures, methods of measuring and the exam of monitoring system are stated. Practice part is focused on measuring and comparing operational performance of FVE Kurdějov and FVE Šakvice II. Operational performance was calculated from exported data for years 2014 and 2015. The thesis also contains measuring of each string connected to inventors, which are installed on the power plant. The result is an identification of strings with decreased operational performance. Based on that was created recommendations for optimalization and increase of the performance. The last part is software for simulation of photovoltaic power plant. This SW calculates potentional energy, which could be produced in a day with available data export. The calculation is defined by parameters, which are assigned.
|
|
|
Study of electrical and dielectric properties of thin polymer films
Miklíková, Zdeňka ; Novák, Vítězslav (referee) ; Zmeškal, Oldřich (advisor)
The thesis is focused on the study of electric and dielectric properties of thin-film organic materials that can be used as an active layer of photovoltaic cells. Primarily were studied the properties of the layers on the glass substrate, which consist of a thin active layer of mixture ZnPc/PCBM with Al or Au contact. On the selected samples were first measured current-voltage characteristics in the dark and during the exposure then on the selected samples were measured frequency dependences (impedance spectra) in the dark and finally on the selected samples were measured relaxation characteristics (transient response analysis – current dependences on time at constant voltage) in the dark. The measured data for transient measurement were evaluated using the methods of fractal analysis in HarFA. The results will be used to optimize the properties of photovoltaic cells.
|
|
|
Organic semiconductors
Tebich, Ivan ; Macháček, Martin (referee) ; Boušek, Jaroslav (advisor)
My final thesis treats of usage photovoltaic phenomenon to production electric energy by solar cells. It inquires into this phenomenon in organic structures. Further it mentions basic types of constructions organic solar cells and evaluates their properties. In experimental part zhe thesis is focused on characterization thin-film structures made out of photoconductiv organic materials.
|
|
|
Study of electrical properties of thin polymer films
Pospíšil, Jan ; Vala, Martin (referee) ; Zmeškal, Oldřich (advisor)
The thesis is focused on the study of electric and dielectric properties of thin-film organic materials that can be used as an active layer of photovoltaic cells. Primarily were studied the properties of the layers on the PET or glass substrate, which consist of a thin active layer of polymethylphenylsilane (PMPSi) or derivatives of diketopyrrolpyrrole (DPP). On a selected sample were first measured current-voltage characteristics and current dependences on time at constant voltage (relaxation characteristics). Finally were measured frequency dependences (impedance spectra) and their relaxation characteristics too. The measured data were evaluated using the methods of fractal analysis in HarFA. The results will be used to optimize the properties of photovoltaic cells.
|
|
|
Characterization Of Electrical Properties Of Graphene-Based Materials On Mems Structures
Brodský, Jan
This work presents characterization of basic electrical properties of graphene and graphene oxide. Graphene was prepared by chemical reduction of graphene oxide. The experimental part of this work describes the process of graphene oxide and reduced graphene oxide sample preparation and measurement of its current-voltage characteristic by two-point probe method. Measurement is carried out on MEMS structure, which can be used for mechanical bending. Such structure will serve for utilization of graphene and other 2D materials.
|
|
|
Characterization of graphene electrical properties on MEMS structures
Brodský, Jan ; Pekárek, Jan (referee) ; Gablech, Imrich (advisor)
This work presents basic properties of graphene, methods for its synthesis and methods for its characterization by Raman spectroscopy, two-point probe, four-point probe and van der Pauw measurements. The experimental part of this work describes the process of graphene oxide, reduced graphene oxide and graphene sample preparation and measurement of its current-voltage characteristic by two-point probe method. Subsequently, sample annealing in vacuum furnace is described in this work. The annealing is important for acquiring good electrical contact between the 2D material and electrodes. Sample analysis by Raman spectroscopy is performed. The last chapters of this work describe design and fabrication of MEMS structure. Such structure serves for characterization of graphene and other 2D materials.
|
|
|
Properties of solar cells based on polymer-silicon junction
Pavlovič, Dean ; Toušek, Jiří (advisor) ; Křivka, Ivo (referee)
Title: Properties of solar cells based on polymer-silicon junction Author: Dean Pavlovič Department / Institute: Department of Macromolecular Physics Supervisor of the bachelor thesis: doc. RNDr. Jiří Toušek, CSc, Department of Macromolecular physics Abstract: The aim of this work is to study unconventional materials, namely conjugated polymers, as to be used for photovoltaic purposes. Among these polymers are polyaniline, derivative of polyphenylene vinylene and two derivatives of polythiophene. Four different methods are used to study some of the physical quantities of the samples, that should affect overall efficiency of solar power conversion. Firstly, I-V characteristics yields fill factor and indicates mechanism of charge transport. Method based on surface photovoltage (SPV) estimates diffusion length of the charge carriers - excitons. Impedance spectroscopy and particular method abbreviated CELIV both measure charge carrier mobility. Outcome of this work are the values of these quantities for some of the samples. Keywords: organic semiconductors, solar cells, mobility, diffusion length, current-voltage characteristic
|
|
|
PV plant performance evaluation and optimization
Špinar, Marek ; Ptáček, Michal (referee) ; Morávek, Jan (advisor)
The Master´s thesis deals with issues of operational performance of two photovoltaic power plants. In the thesis is stated the history of photovoltaics, description of photovoltaic effect, used materials and production technology of the most used material in PV industry – Silicon. The basic parts and parameters of photovoltaic power plant are described. Thesis also solves, how could be done the first and periodically control due to relevant directives. The ways of diagnostics potentional failures, methods of measuring and the exam of monitoring system are stated. Practice part is focused on measuring and comparing operational performance of FVE Kurdějov and FVE Šakvice II. Operational performance was calculated from exported data for years 2014 and 2015. The thesis also contains measuring of each string connected to inventors, which are installed on the power plant. The result is an identification of strings with decreased operational performance. Based on that was created recommendations for optimalization and increase of the performance. The last part is software for simulation of photovoltaic power plant. This SW calculates potentional energy, which could be produced in a day with available data export. The calculation is defined by parameters, which are assigned.
|
|
|
Organic semiconductors
Tebich, Ivan ; Macháček, Martin (referee) ; Boušek, Jaroslav (advisor)
My final thesis treats of usage photovoltaic phenomenon to production electric energy by solar cells. It inquires into this phenomenon in organic structures. Further it mentions basic types of constructions organic solar cells and evaluates their properties. In experimental part zhe thesis is focused on characterization thin-film structures made out of photoconductiv organic materials.
|
guest ::
